Two Antennas in One!
The ARRL Dual-band Momobeam 6/10 Antenna features a 10-meter Moxon (28 MHz) and 6-meter Yagi (50 MHz).
High-quality design. The antenna is made of aluminum tubes, galvanized steel hardware, UV-resistant POM-C driver insulators and polypropylene clamps. Assembly is easy, and all tubes are labeled.
1500-watt antenna power rating. The feed system uses an open sleeve feed method, coupling the driven element of the 6-meter section by proximity and length to the 10-meter driven element with minimal loss. This technique contributes to a simple and efficient design for the user. Attach a single coaxial cable with a PL-259 connector to the coaxial pigtail using the included SO-239 connector. It’s ready to go!
A Moxon on 10 meters. This effective design reduces the traditional Yagi to a size typically 30% smaller and utilizes no traps or other shortening techniques that reduce performance. A Moxon antenna is actually one of a number of configurations that Les Moxon, G6XN (SK), referred to as “two-element close-spaced beams.” The Moxon made its QST debut in an article by L.B. Cebik, W4RNL (SK), in which he discussed design parameter variations and their effect on performance. The Moxon has the reputation of being a high-performance antenna with no tradeoffs. It is ideal for the wide bandwidth of 10 meters.
Two sets of hardware included. Install it on a small mast, or a tower, or take it with you for quick assembly and portable use. We included hardware for fixed permanent installations, and a second set of hardware with thumb screws and wingnuts for temporary deployments at your next park activation or ARRL Field Day. At only 10.8 lbs., the beam can be turned by a lightweight TV antenna rotator.
A beam for everyone! This dual-band beam antenna is perfect for new hams, beginners, portable operators, university club stations, and even big stations looking for a lightweight yet robust antenna. Put this antenna on the air and operate 10 and 6 meters with a single feed line. The bands are hot and so is this antenna!
Features:
Lightweight (assembled antenna is 10.8 lbs.)
Mast-mountable (turning radius is only 6.56 feet)
Includes extra hardware for fixed and portable use (thumb screws and wing nuts)
Labeled parts for quick and easy assembly
No measuring or calibration required
Package Weight: 14 lbs.
Dimensional Weight: 17 lbs.
Package Dimensions: 63" x 6" x 6"
POTA activation video. It was a sunny day with perfect weather – we couldn’t help but take the new ARRL Momobeam Antenna outside for a Parks on The Air® activation as W1AW. Steve, K5ATA, is an experienced POTA activator, and he shows Alex, KC1RMO, the ropes on a beautiful day. See how easy it is to setup the antenna, get on the air, and rack up a ton of contacts. Watch now.
For more specifications and more information, visit www.arrl.org/beam.
Produced exclusively for ARRL The National Association for Amateur Radio® by Momobeam.